MECL Non Executive Syllabus 2026: Mineral Exploration and Consultancy Limited (MECL) has released Advertisement No. 03/Rectt./2026 for recruitment to various Non-Executive posts. The recruitment includes posts such as Accountant, Technician, Assistant, Stenographer, Electrician, Machinist, Technician (Drilling), Mechanic-cum-Operator (Drilling) and Junior Driver, among others.
For candidates preparing for the examination, understanding the syllabus is important because the technical section changes according to the post. The General Aptitude portion, on the other hand, is common in the MECL written-test pattern.
The latest MECL recruitment advertisement confirms that selection involves a Written Test followed by Document Verification and a qualifying Skill/Trade Test wherever applicable. The written test carries 100% weightage in the final merit, while the Skill/Trade Test is qualifying in nature.
Important: MECL’s 2026 advertisement does not currently provide a separate detailed question-wise written syllabus. The detailed post-wise topics given below are therefore designed using the latest official MECL post-wise syllabus available and the technical duties/proficiency areas specified in the 2026 recruitment advertisement. Candidates should also check the MECL Careers page for any subsequent syllabus or exam-handout update.
The latest detailed MECL written-test structure available officially consists of two objective-type sections:
| Section | No. of Questions | Marks | Duration |
|---|---|---|---|
| General Aptitude Test | 50 | 50 | 60 minutes |
| Technical Knowledge Test | 50 | 50 | 60 minutes |
| Total | 100 | 100 | 120 minutes |
The examination is conducted in online mode. The previous official MECL test structure specifies one mark per question and no negative marking. The General Aptitude section is bilingual in English and Hindi, while the Technical Knowledge section is based on the relevant post/trade.
The selection process is slightly different from many conventional government examinations. MECL has stated that candidates will first be screened for eligibility. Shortlisted candidates will then appear for the written examination.
The broad process is:
Application Screening → Written Test → Document Verification → Skill/Trade Test → Final Merit List
The 2026 advertisement states that the Written Test has 100% weightage. Candidates clearing the written-test cut-off are called for Document Verification, ordinarily in a ratio of up to 1:7 against the advertised vacancies. The Skill/Trade Test is qualifying in nature, and the final merit list is prepared on the basis of Written Test marks after eliminating candidates found unsuitable in the skill/trade test.
| Category | Minimum Written Test Cut-Off |
|---|---|
| UR/OBC-NCL/EWS | 50% |
| SC/ST | 45% |
| PwD | Relaxed standard as per applicable Government guidelines |
MECL has also specified that the minimum qualifying marks for the essential educational qualifications for direct recruitment to Non-Executive positions are generally 45%, while qualifications such as Intermediate CA/ICWA and certain certifications require a pass rather than a prescribed percentage.
The General Aptitude section is common and can make a significant difference in the overall score. The latest official MECL post-wise syllabus groups this part under General Knowledge & Current Affairs, Quantitative Aptitude, Data Interpretation, Logical Reasoning and Verbal Aptitude/basic English.
Candidates should prepare:
For current affairs, candidates should preferably cover the 6–8 months immediately preceding the examination.
Important areas include:
Prepare:
Important topics include:
Candidates should revise:
The Accountant post is in W-7 grade, with the 2026 advertisement requiring graduation along with Intermediate-level CA/ICWA qualification and relevant experience. Basic computer proficiency and SAP-FICO knowledge have also been mentioned as desirable.
For preparation, candidates should concentrate on the following areas.
These areas closely follow the accounting-oriented syllabus previously officially published by MECL, which allocated the technical section across Accounts, Cost & Management Accounting, Economics/GST and Business Organisation & Management.
The 2026 recruitment includes Assistant (Materials) and Assistant (Accounts) separately. Assistant (Materials) requires graduation with Mathematics or B.Com., while Assistant (Accounts) requires B.Com. Basic computer knowledge and SAP-related proficiency are desirable for the respective roles.
Candidates should prepare:
The earlier official MECL syllabus specifically describes Assistant Accounts questions as being of a simple level of difficulty.
For the Materials stream, focus on:
These areas are based on the official MECL syllabus previously published for Assistant (Materials), which specifically includes inventory management, SAP-MM, transportation, supply-chain management, procurement, contract management, GeM and material insurance.
MECL’s 2026 recruitment has Stenographer (English) under W-4. Candidates are required to have graduation and a shorthand certificate with 80 words per minute in English; basic computer proficiency is desirable.
The written-test preparation should cover:
Although shorthand and typing are primarily assessed through the skill requirement, candidates should practise:
Since the 2026 advertisement specifically requires an 80 WPM shorthand certificate, candidates should not treat the written examination as the only preparation requirement.
The Electrician post is W-4. The 2026 advertisement requires ITI Electrical or Diploma in Electrical along with a valid Wireman certificate and relevant experience. The role is associated with electrical wiring, repairs, machinery, power generation, transmission and distribution.
The Machinist post is W-4. MECL’s 2026 advertisement accepts ITI qualifications in Turner/Machinist/Grinder/Miller trades or relevant mechanical diplomas. The role specifically involves machine-shop work, CNC/VMC machines, conventional lathes, milling and grinding.
These topics are directly aligned with MECL’s detailed published Machinist syllabus, which covers machining operations, CNC/VMC, metrology, engineering drawing, material science and industrial safety.
This is one of the most important technical posts in the 2026 recruitment. MECL has advertised 12 backlog vacancies for Technician (Drilling), requiring relevant ITI/Diploma qualifications, a valid HMV licence and relevant drilling or drill-rig maintenance experience.
The 2026 advertisement itself highlights these areas under the desirable proficiency for Technician (Drilling), making them particularly important for preparation.
MECL has advertised 30 posts for Mechanic-cum-Operator (Drilling), making it one of the larger recruitment categories in the 2026 notification. The post requires relevant ITI or Diploma qualifications and experience in diesel/motor mechanic, fitter or drilling work.
The 2026 notification specifically mentions drilling-rig maintenance, mechanical systems, engines, hydraulics, hoisting systems, rotary components, troubleshooting and safety as desirable working knowledge for this post.
The Junior Driver post is W-3 with a pay scale of ₹19,600–₹47,900. Candidates must have passed Class 10 and possess valid LMV and HMV licences, along with one year of consolidated experience in light and heavy vehicle driving.
MECL’s 2026 advertisement specifically expects Junior Drivers to have knowledge of motor mechanism and minor repairs, including tyre and battery maintenance, lubrication, accelerator/brake/clutch adjustment, engine tune-up, brake adjustment and wheel alignment.
| Post | Main Technical Areas |
|---|---|
| Accountant | Financial Accounting, Cost Accounting, Economics, GST, Management |
| Assistant (Accounts) | Accounting, Costing, Economics, GST, Business Management |
| Assistant (Materials) | Inventory, Procurement, Supply Chain, SAP-MM, GeM, Contracts |
| Stenographer | English, Basic Computer, Shorthand/Typing |
| Electrician | Electrical Fundamentals, Wiring, Machines, Power Systems, Safety |
| Machinist | Lathe, Milling, CNC/VMC, Metrology, Engineering Drawing, Safety |
| Technician (Drilling) | Core Drilling, Drill Rigs, Drill String, Drilling Parameters, Safety |
| Mechanic-cum-Operator (Drilling) | Drill Rig Maintenance, Diesel Engines, Hydraulics, Fitting, Drilling |
| Junior Driver | Vehicle Operation, Traffic Rules, Motor Mechanism, Repairs, Safety |
The biggest mistake candidates can make is spending all their preparation time on general aptitude. Half of the written examination is technical, so the technical section deserves equal attention.
A practical preparation strategy would be:
First revise your ITI, Diploma, B.Com., CA/ICWA or graduation-level fundamentals according to the post. Do not immediately jump into difficult questions.
The General Aptitude section carries 50 marks. Practise mathematics, reasoning, English and current affairs regularly rather than leaving them for the final weeks.
For technical posts, concentrate especially on the practical aspects of the job. For example, a Technician (Drilling) candidate should understand drill rigs, drill strings, core barrels, drilling parameters and troubleshooting rather than simply memorising theoretical definitions.
Because the examination is objective in nature, solve MCQs after completing each topic. This will also help you identify weak areas.
Once the syllabus is covered, start taking 100-question mock tests. Since the published MECL test structure gives 120 minutes for 100 questions, candidates should practise maintaining a reasonable speed.
Do not ignore the practical stage. MECL has clearly stated that the Skill/Trade Test is qualifying in nature. Candidates must therefore be comfortable with practical tasks relevant to their post.
Here are a few simple tips that can make preparation more manageable:
The latest advertisement states that the eligibility cut-off date is September 1, 2026. Online applications are scheduled to be accepted from September 12, 2026, to October 11, 2026. Candidates should verify these dates and any subsequent changes on the official MECL recruitment page before applying.
MECL has also stated that tests for the recruitment process will be conducted in Nagpur City.
Candidates should rely primarily on the official MECL Careers section for the final examination pattern, syllabus, admit card and other recruitment updates.
MECL Careers – Official Recruitment Page
The MECL Non-Executive examination is not difficult simply because it has 100 questions; the real challenge is balancing the 50-mark General Aptitude section with the 50-mark technical section. Candidates preparing for Accountant and Assistant posts should spend more time on accounts, economics, GST, procurement and management, while ITI candidates should build strong fundamentals in their respective trades.
For posts such as Technician (Drilling), Mechanic-cum-Operator (Drilling), Machinist and Electrician, practical knowledge can be especially useful because the 2026 recruitment advertisement itself highlights hands-on technical proficiency. Junior Driver candidates, meanwhile, should prepare both vehicle-mechanism topics and road-safety rules.
Most importantly, candidates should remember that the final merit is based on Written Test performance, while the Skill/Trade Test is qualifying in nature. A balanced preparation strategy, regular mock tests and strong technical fundamentals can therefore put candidates in a much better position for the MECL Non-Executive recruitment 2026.
Q1. How many questions are asked in the MECL Non Executive exam?
The latest officially published MECL test structure contains 100 objective questions: 50 General Aptitude and 50 Technical Knowledge questions.
Q2. How many marks is the MECL Non Executive exam?
The written examination is of 100 marks, with one mark assigned to each question.
Q3. Is there negative marking in the MECL Non Executive exam?
The latest published MECL written-test structure specifies no negative marking.
Q4. What is the duration of the MECL Non Executive exam?
The published test structure provides 120 minutes, with 60 minutes for General Aptitude and 60 minutes for Technical Knowledge.
Q5. Is the MECL Skill/Trade Test counted in the final merit?
No. The Skill/Trade Test is qualifying in nature. After unsuitable candidates are eliminated, the final merit list is prepared on the basis of Written Test marks.
Q6. What is the MECL written-test cut-off for General candidates?
The 2026 advertisement specifies a 50% cut-off for UR/OBC-NCL/EWS candidates and 45% for SC/ST candidates. PwD candidates are subject to the applicable relaxed standard.
Q7. What is the syllabus for MECL Technician (Drilling)?
Major areas include drilling fundamentals, drill-rig operation, drill strings and core tools, drilling parameters, troubleshooting and drilling safety.
Q8. What should Machinist candidates study for MECL?
Machinist candidates should focus on machining operations, lathe, milling, drilling, grinding, CNC/VMC, metrology, engineering drawing, material science and industrial safety.
Q9. What should Junior Driver candidates prepare?
Junior Driver candidates should study vehicle operation, traffic rules, road safety, motor mechanism, minor repairs, vehicle documentation, drill-rig transportation and emergency response.
Q10. Has MECL released a separate detailed 2026 post-wise written syllabus?
The current 2026 recruitment advertisement provides the recruitment and selection details and technical proficiency requirements, while the detailed post-wise syllabus available on MECL’s website is from its earlier recruitment test material. Candidates should check the official MECL Careers page for any new 2026 syllabus or examination handout before the written test.
Israel has a network of diplomatic, military, economic and strategic relationships stretching across North America,…
When we think of the biggest ship in the world, the first image that usually…
The Chairman of the Indian Space Research Organisation (ISRO) holds one of the most prestigious…
The PSSSB Group D Syllabus 2026 is an important resource for candidates preparing for Punjab…
The IMD Scientific Assistant Syllabus 2026 is especially important for candidates preparing for the Staff…
A Vice President (VP) position at Bank of America (BofA) is a senior professional role,…